Welcome To Saudi Rock Wool Factory

Quality Management

Maintaining high quality products is the first commitment of the company towards its valued customers, Quality Assurance Department was established to insure the conformity of the products to the relevant technical local and international standards. The highly equipped in-house laboratory is utilized to perform most of raw material and product testing, additionally SRWF products are frequently tested by local and international third party independent laboratories for certification and approval purposes, this enabled the factory to obtain ISO 9001 Quality System Certificate since 1998, in addition to European Conformity Mark (CE) and Dubai Central Laboratory (DCL) Certificates.

Certifications:

STANDARDS AND COMPLIANCE CERTIFICATES
Characteristic	Applicable standards	Laboratory
Non-combustibility test	CNS EN ISO 1182	PAVUS, fire testing laboratory, authorized BODY a0 218 (Czech Rep.)
Heat of Combustion	CSN EN ISO 1716
Indicative Fire Resistance Test for Drywall Partitions	CNS EN 1363-1 2000
Reaction of construction products to fire (EURO fire classification)	CSN EN ISO 13501
Chemical Analysis	ICP. AA.G.CH	Arab company for laboratories and soil (K.S.A)
Release of Dangerous Substances	ISO 16000 - 6	Technical and test institute for construction prague (TZUS) analytic chemistry laboratory (Czech Req.0)
Thermal Conductivity	EN 12667	Technical and test institute for construction prague (TZUS) Authorized Body 204, Notified Body 1020
Dimensions	EN 822, EN 823, EN824
Flatness	EN 825
Dimensional stability under specified temperature and humidity conditions	EN - 1604
Compressive Resistance	EN - 826
Short Term Water Absorption	EN - 1609
Squereness	EN - 824
Long term Water Absorption	EN - 12087
Water vapor transmission	EN - 12086
Thermal Conductivity	ASTM C - 0177	SASO Laboratory test Report Saudi Arabian Standardization Organization SASO-(Saudi Arabia)
Water Absorption	ASTM C - 0209
Humidity Resistance	ASTM C - 1140
Corrosiveness	ASTM C - 665
Compressive Resistance	ASTM C - 165
PH	ASTM C - 871
Shot Content	ASTM C-612	Al-Hoty - Stanger (Saudi Arabia)
Chemical Analysis	Atomic Absorption
PH	ASTM C - 871
Chemical Analysis For Leachable Ions	ASTM C - 871
Water Absorption	German Industrial Standard AGI Q 136
Chloride Ions Content	German Industrial Standard AGI Q 135
Asbestos Free	PLM Analysis EPA 600/R-93/116
Chemical Analysis	Atomic Absorption	King Abdulaziz City For Science and Technology
Fungi Resistance	ASTM C - 665	SGS Testing Company USA
Corrosion To Aluminum And Copper	ASTM C - 665-01 SECTION 12.8
Water Vapor Transmission	ASTM E - 96
Sound Transmission Of Wall Partition	ASTM E - 90	Johns Manville Laboratories
Thermal Conductivity At High Temperature	ASTM C - 177
Flame Spread Index	ASTM E - 84
Smoke Develop Index	ASTM E84
Sound Absorption	ASTM C - 423	Celotex Testing Services (USA)
Water Vapor Absorption	ASTM C - 1104
Flame Spread Index	ASTM E - 84
Smoke Develop Index	ASTM E - 84
Thermal Conductivity	ASTM C - 177	Ministry Of Municipal Affairs & Agriculture-Qatar
Compressive Resistance	ASTM C - 167	GTC (Saudi Arabia)
Chemical Analysis	Atomic Absorption	GTC (Saudi Arabia)
None Combustibility Test	ISO 1182:1990 as modified by IMO Resolution MSC. 61(67)	BRE Testing (U.K)
Thermal Conductivity	EN - 12667:2001	Institute Of Thermal Insulation Of (Vilnius University-Lithuania)
Water Absorption	EN - 1609, EN - 12087
Water Vapor Diffusion Resistance Factor	EN - 12086
Compressive Resistance	EN - 826
Sound Absorption Coefficient	CSN ISO 10534-1	Tec. University Of Liberec (Czech Republic)
Thermal Conductivity	ASTM C 518:2004	Certificate of Product Conformity Factory Made Mineral Wool (MW) Products BS EN 13162:2012
Fire Behavior	ASTM E 136:2004
Compressive Strength	BS EN 826:1996
Dimensional Stability	BS EN 1604:1997
Water Vapor Transmission	ASTM E96-00
Water Absorption	BS EN 1609:1997 METHOD A
Density	BS EN 1602:1997/ BS 2972 SEC.3 1989
Thickness	BS EN 823:1995
Length & Width	BS EN 822:1995
Flatness	BS EN 825:1995
Squareness	BS EN 824:1995

2010 Dubai Green Building Regulation and Specification (GBRS) SRWF Pipe and Ducts Insulation Products (Rockwool) Certificate No. CL18020558		2010 Dubai Green Building Regulation and Specification (GBRS)
Thermal Conductivity	ISO 8301	KING SAUD UNIVERSITY
	ASTM C 518
	DIN EN 12667/12939
	DIN EN 13163
Certificate of Compliance Approval Standard for Class 1 Fire Rating of Insulated Wall or Wall and Roof/Ceiling Panels, Interior Finish Materials or Coatings, and Exterior Wall Systems Class No. 4880 Approval Standard for Pipe and Duct Insulation Class No. 4924		FM Approval Certificate
Volatile Organic Substance California Department of Public Health CDPH/EHLB/ Standard Method Version 1.1, 2010 (Emission Testing method for CA Specification 01350)		VOC Emission Certificate
ISO 9001: 2015 Certificate No. SA15/2494 ISO Quality Management System QMS Manufacturing, Marketing after Sales Services of Rockwool Thermal and Acoustical Insulation Materials for Industrial, Commercial and Residential Purposes (valid until 15 August 2021 (including Al Kharj Plant and Jeddah office).		ISO 9001: 2015 Certificate
Certificate of Compliance : Saudi Standards, Metrology and Quality Organization (SASO) conformity mark and certificate based on SASO GSO EN 13162
Saudi Civil Defense Approval for all SRW products , The approval this time based on SASO certificate / UL 723 & ASTM E84 tests
Certificate of Compliance UL 723/ASTM E84, Standard for Surface Burning Characteristics for Building Materials. Faced and Unfaced SRW Products		UL 723/ASTM E84
Certificate of Compliance UL 2818 - 2013 Gold Standard for Chemical Emissions for Building Materials, Finishes and Furnishings		UL 2818 – 2013 Green Guard

Quality Management

STANDARDS AND COMPLIANCE CERTIFICATES